why is my pressure washer not starting

Run water through pressure washer until all air is removed from the hose. If the porcelain insulator is cracked an electrode is burned away or damaged or there is heavy carbon buildup at the.

Pin On Pressure Washer Brands

Clean if dirty and replace if damaged.

. If your pressure washer doesnt start one issue could be a defective spark plug. If it wont fire it. Check your air filter.

If the trigger is loose or can be depressed while the safety latch is engaged or water is leaking around the gun handle replace the spray gun immediately. Read the fine print on the extension cord to verify that you are using the correct type. A spark plug ignites the fuel in the engine so if it is defective the engine will not start.

01 - Spark Plug. This sticky fuel can clog up the. The carburetor might be clogged.

This video provides information on how to troubleshoot a pressure washer and the most likely defective parts associated with thi. Make sure that you have spark check the plugs your ignition coil and make sure your ignition air cap is set correctly. A clogged carburetor is most commonly caused by leaving fuel in the pressure washer for a long period of time.

Make sure your carburetor float is not stuck that your. Inspect the spark plug for signs of wear or damage. If the circuit is the issue youll need to open your electrical panel and check for a tripped breaker.

Now fill the pump with oil until it. If the extension cord is longer than 25 feet it must be a 12-gauge wire cord. If the pressure washer has been sitting for a long time for example the fuel could have broken down and clogged the carburetor.

Step 1- Shut the engine off and turn. If the oil is low add oil until it reaches the full line on the. Make sure the rocker switch that controls the engine is.

If a pressure washer will not start the first thing to check is the oil level. Why your Pressure Washer wont startand how to fix it. Why is my pressure washer not starting.

Open the pump by turning the knob counterclockwise. Pressure washer wont start. If none of the outlets work you may have a problem with your circuit.

Up to 32 cash back When the engine on your pressure washer wont start follow these troubleshooting tips to fix the problem. Ensure that the pressure washer is turned off and all the hoses are disconnected. The cord gauge is.

Pin On House Gadgets